We’re really proud of this Battle of Britain weathervane, as it took ages to get the design just right! The concept behind the design was brought to us by the customer; that being a Lancaster Bomber in flight, flanked by a Hurricane and a Spitfire, flying over rooftops. I thought it would be a nice idea to show the landscape changing from a city scape to the countryside, so factories and houses merging into trees, an Oast house and a windmill. We spent a while playing about with the design in order to get the angle of the three planes correct so they look as though they are flying in unison and not about to crash – harder than you might imagine! We took care to make sure the differences between the spitfire and Hurricane were distinctive and clear in silhouette form too. It was also important to ensure all of the planes had enough contact with other areas of the design in order to support them – we have ended up using a 4mm support rod to give the design extra strength, which when painted grey as it is will be barely noticeable against the sky.
It seems very appropriate to have designed this weathervane as we approach the 80 year anniversary of this Battle, seen by many as Germany’s first defeat in the war, and a crucial turning point for the allies. Very pleased with how it has turned out, and so was our customer.
We produced this weathervane based on a customer’s two Welsh Cobs a couple of years ago. I love this design, it’s great how the markings can be cut out to distinguish the pair from each other. In terms of the functionality of the weathervane there is a little bit of science there; the horse with the cut outs needs to be the one at the centre of the weathervane, and not the one at the back. This is because in order to work, there needs to be a considerably greater amount of surface area at the back in order to turn the sail into the wind; having the two horses the other way around just wouldn’t function very well.
At the end of last year we had an enquiry from a customer asking if we could produce a very similar design but based on a photo of her horses. Of course this is exactly what we like to do, so took on the challenge and she sent some good quality images over. I was a little concerned by the amount of white on the horse, as this would mean having a huge amount of steel cut out, possibly causing the design to be quite delicate. I got around this by drawing quite a thick outline, and as this horse would be in the centre of the weathervane, the force exerted on it by the wind should be minimal anyway so it should be fine. Below is the new design we created. You can check out our current range of Horse Weathervanes here, or contact us to commision a bespoke weathervane design at no additional cost.
Being very much dog people, we love being asked to create bespoke weathervanes designs that clearly show the distinct personalities of the different breeds, and this Springer Spaniel weathervane is a perfect example of that. A customer contacted us asking for a weathervane based on her Springer Spaniel flushing pheasants, and as my family have had Springers for years this is a scene I know well! Even though our dogs were not working dogs, I always remember the joy and excitement on their faces as they ran through undergrowth chasing birds out, so it shows how strong the instinct is even when the dogs are just pets. So, I had plenty of inspiration to work with just from within my own memory.
Helpfully, our customer had provided photos of her dog so I knew how long the tail needed to be, and how the coat should look- this saves a lot of time rather than having to go back later and make alterations. I decided to draw ferns partly because they are so beautiful and distinctive, but also because we often walk on the moorland near Oldham, and it’s full of grouse and pheasants so seemed the perfect setting for a Springer Spaniel weathervane design. I always find it quite difficult drawing dogs in action compared with a flat side profile, but so much more satisfying as it shows the personality and instincts of the breed and the design comes to life. We’re very happy with the finished result, and proud to add it to our portfolio!
We created this bespoke weathervane to match the markings of a customer’s horse, using cut outs to show the areas of white. It’s a great way to personalise a weathervane design, and is not difficult to do if a clear photo is provided. We’re currently working on a version of this design where one of the horses has a lot more white on his coat – this makes it a little more challenging in making sure the design is strong enough with there being so much cut out. Our current range of horse weathervanes can be found here, and we are always up for the challenge of bringing a bespoke design idea to life!
A great photo of our George and Dragon weathervane insitu, a perfect gift for any proud English person. I’ve painted the St George’s Cross on the shield by hand, and gilded the Dragon’s tongue, tip of his tail and the tip of the spear to match the letters. This helps the weathervane to stand out beautifully; the customer is absolutely thrilled with it. A truly unique piece!
We now have a large number of weathervane designs available on our website but always welcome bespoke comissions.
This week I’ve been working on a few bespoke weathervane designs, including a Bentley Continental Fastback, and a group of three Barn Owls, as shown above. I began by drawing 5 or 6 different Owls using my graphics pen, and selecting the three that fitted together best. I love how distinctive Barn Owl faces are; this will make a fantastic weathervane when the design is finished! The only problem I have with it is in highlighting the features of the face – this part of the design looks very delicate so I’ll have to thicken these lines without affecting the look of it, or it won’t be practical to cut in steel. Initially I had thought that the 3rd Owl should be a baby, but they are such fluffy little things, when I try to draw one in silhouette they end up looking like a bit of a mishapen blob! I’ve sent a couple of initial weathervane designs to the customer, so he can give some feedback and we can make any alterations before coming up with the final design. We look forward to having another owl weathervane design to add to our existing owl and moon weathervane and owl hunting weathervane designs.
Just had this great photo sent in showing a Schnauzer weathervane we’ve produced recently; the angle of the sail is perfect as it shows the laser cut design so clearly, plus the lovely blue sky really helps it to stand out! We’ve done a couple of variations on this design, where customers have asked us to make minor alterations to make the Schnauzer look more like their dog, so for example we’ve docked the tail in the past, and made the dog male, or a little scruffier. So if you cannot find a weathervane suitable amongst our dog designs, whatever your specification, feel free to contact us as we can usually accomodate most design requests at no extra cost.
A great example of a personalised weathervane, given as a birthday gift. Our customer contacted us asking if we could produce a bespoke weathervane featuring her husband and the things he loves; this included playing the guitar, fishing, walking their Border Collie, and drinking good wine. Though we have created fishing weathervanes, border collie weathervanes and even a few with people drinking on them, at first it seemed a little challenging as to how on earth we would fit all of these seemingly quite different interests into one image, but we did it! We’re really proud of the design, especially as these are pretty well all things we enjoy ourselves so it was a fun one to draw despite initally having no idea how to go about it. The customer and the recipient were both delighted with their personalised weathervane; she even sent us a video of her husband opening the suprise gift, which was genuinely fantastic for us to see, as we never normally get to see people’s reactions to what we have designed and made for them!
We love this photo of our Labrador and Jack Russell dogs weathervane! We’ve done several variations on this doggy tug of war theme including loads of different breeds. They’re challenging to draw in comparison to designing a flat side profile of a dog, as you want to capture the movement and personality while also keeping the physical characteristics of the breed instantly recognisable. I love how the determination and stubborn nature of the little Terrier comes through here in contrast to the calm and gentle Labrador playmate! A wonderful unique gift for dog lovers that can be personalised to reflect your pets.
For more information on this weathervane, have a look at the link below: